Dubai Smart Rental Index: What Changed and How Your Building’s Rating Affects Your Rent (2026)
On 2 January 2025 the Dubai Land Department replaced the rental index that had governed Dubai renewals for more than a decade. The old index averaged a whole area and updated once a year. The Smart Rental Index classifies every residential building from one to five stars, feeds on live contract data, and updates continuously. The rent caps themselves did not change; the benchmark they are measured against did, and that shift can move your renewal by thousands of dirhams in either direction. This guide explains the new mechanics, shows the rating working in dirhams, and sets out how to check your own building.
Quick answer: Since January 2025 your rent is no longer compared with a simple area average. The Smart Rental Index blends the area average, your building’s own contract rents, and a one-to-five star classification built from more than 60 criteria, and it refreshes continuously instead of annually. A highly rated building carries a higher comparison average, which can widen the gap below it and open a higher increase band at renewal. A low-rated building is measured against similar buildings, which can pull its average, and its landlord’s cap, down.
Run your renewal through the current rules
Enter your current rent and the index average for your home to see your band and the highest rent your landlord can legally set at renewal.
Open the RERA Rental Increase CalculatorIn this guide
- How the old index worked
- What launched on 2 January 2025
- The chain: rating, average, gap, cap
- Old index vs Smart Rental Index
- Two buildings, two directions: worked examples
- What the rating means for tenants and landlords
- How to check your building and your average
- Which situation are you in?
- Smart Index checklist
- Common mistakes
- Myth vs fact
- Frequently asked questions
Key takeaways
- The increase bands in Decree No. 43 of 2013 are unchanged: 0%, 5%, 10%, 15% and 20%. Only the average your rent is compared with is new.
- Every residential building now carries a classification from one to five stars, scored across more than 60 criteria covering structure, finishes, maintenance, location and services.
- The comparison average now blends three inputs: the area average, the building’s own rents from registered contracts, and the building’s classification.
- The index updates continuously. An index result you saved last year is stale evidence at this year’s renewal.
- The rating cuts both ways. It can raise the benchmark for a well-kept building and lower it for a neglected one on the same street.
How the old index worked
The previous rental index, in place in evolving forms since 2009, was a table of area averages. For each district it published average rents by unit type, drawn from registered tenancy contracts, and refreshed them roughly once a year. At renewal, your rent was compared with the average for your area and unit size. That one figure decided your gap, your band, and your cap.
The weakness was built into the design. An area average mixes new towers with ageing blocks, renovated flats with tired ones. A landlord in a dated building could point to an average lifted by the premium tower across the road. A landlord in the premium tower was held to an average dragged down by older stock. Both sides argued from the same blunt number, and a figure published in January might describe a market that had moved on by the autumn.
What launched on 2 January 2025
The Smart Rental Index, launched by the Dubai Land Department on 2 January 2025, keeps the legal framework and replaces the measuring instrument. Four mechanics matter.
1. Buildings are classified, one to five stars
Every residential building in Dubai, including buildings in free zones and special development areas, is rated from one to five stars. The classification is built from more than 60 criteria grouped into families:
| Criteria family | What it covers |
|---|---|
| Technical and structural characteristics | Construction quality, building systems and structural condition |
| Finishes and maintenance | Quality of interior and exterior finishes, and how well the building is maintained |
| Location and spatial value | Position, access, surroundings and the quality of the space itself |
| Services and facilities | Maintenance services, cleanliness, security, parking management and shared amenities |
The classification is data-driven and revised as the data changes. It is not a one-off label fixed at launch.
2. The average blends three inputs
At launch, the Land Department described the new value as a combination of three things: the average rent in the area, the average rent in the building itself, taken from existing and new registered contracts, and the building’s classification. The building-level inputs are the break with the past. Your comparison figure now reflects what homes in your building actually achieve, adjusted for the class the building sits in.
3. The data is live contract data, and the index updates continuously
The index draws on the tenancy contracts registered through Ejari, the same register your own contract sits in. Instead of an annual refresh, values update continuously as new contracts are registered. The average that governs your renewal is therefore the current one, not the one in force when you signed.
4. The caps did not change
Decree No. 43 of 2013 still sets the five increase bands, and the 90-day notice rule still applies at renewal. If you need the bands themselves worked through in full, our guide to the RERA rent increase rules covers them with examples at five rent levels. This guide is about the other half of the calculation: where the average now comes from.
The chain: rating, average, gap, cap
Every renewal runs through the same four links. The Smart Rental Index changed the first two links and left the last two untouched.
Link 1: your building’s star classification helps set its comparison average.
Link 2: the index returns the average rent for similar units in your building’s class.
Link 3: gap = (index average − your rent) ÷ index average.
Link 4: the gap selects your band (0%, 5%, 10%, 15% or 20%), and the band caps the increase on your current rent.
Because the rating feeds link 1, anything that moves the classification moves the average, and anything that moves the average can move you across a band boundary. A one-band move on a typical rent is worth 5% of a year’s rent, several thousand dirhams, which is why the classification has become part of the renewal conversation.
Old index vs Smart Rental Index
| Feature | Old rental index | Smart Rental Index (from 2 Jan 2025) |
|---|---|---|
| Comparison basis | Average rent for the area and unit type | Blend of area average, the building’s own contract rents, and its star classification |
| Building quality | Not measured; new and old buildings shared one average | Every residential building classified from one to five stars on 60-plus criteria |
| Update cycle | Periodic, roughly annual | Continuous, as new contracts register |
| Data source | Registered tenancy contracts, reviewed in batches | Live Ejari contract data plus the classification model |
| Coverage | Residential areas of Dubai | All residential areas, including free zones and special development areas |
| Increase caps | Decree 43 bands: 0% to 20% | Unchanged: Decree 43 bands, 0% to 20% |
| Notice rule | 90 days before expiry | Unchanged: 90 days before expiry |
Two buildings, two directions: worked examples
The rating moves the benchmark, and the benchmark moves the cap. These two examples use the same decree formula throughout; only the average changes. Figures are illustrative examples built on the formula, not quotations from the index itself.
Example A: a well-kept tower, current rent AED 68,000
- Under the old area index: the area average was AED 72,000. Gap: (72,000 − 68,000) ÷ 72,000 = 5.56% below. Band: 0%. Maximum increase: AED 0. The rent could not rise.
- Under the Smart Rental Index: the building is classified four stars, and the blend of its own contract rents and classification puts its comparison average at AED 85,000. Gap: (85,000 − 68,000) ÷ 85,000 = 20% below. Band: 5%. Maximum increase: AED 3,400. Maximum new rent: AED 71,400.
The tenant’s position changed without the flat, the street or the rent changing. The classification pulled the benchmark up, the gap widened to exactly 20%, and a rise that was unlawful under the old average is now within the cap. Twenty percent below is the top of the 5% band, so a slightly lower average would have kept this tenant at 0%.
Example B: an older block beside new towers, current rent AED 60,000
- Under the old area index: new towers on the same street lifted the area average to AED 95,000. Gap: (95,000 − 60,000) ÷ 95,000 = 36.84% below. Band: 15%. The landlord could claim an increase of AED 9,000, to AED 69,000.
- Under the Smart Rental Index: the building is classified two stars, and its comparison average, drawn from similar buildings and its own contracts, is AED 70,000. Gap: (70,000 − 60,000) ÷ 70,000 = 14.29% below. Band: 5%. Maximum increase: AED 3,000. Maximum new rent: AED 63,000.
Here the classification protected the tenant. The building was being measured against homes it does not resemble, and the new average cuts the lawful increase by AED 6,000 a year. This was the case the Land Department made at launch: an older building should not carry a benchmark set by the premium tower next door.
The comparison average in dirhams, old index against Smart Rental Index, for the two worked examples. In Example A the classification raises the benchmark and opens a 5% band. In Example B it lowers the benchmark and cuts the landlord’s cap from 15% to 5%.
What the rating means for tenants and landlords
For tenants, the index result for your unit is now the central document of any renewal. Run it close to the renewal date, save it with the date, and keep it with the contract and the Ejari certificate. If a landlord’s notice relies on a figure you cannot reproduce, ask which average they used. Averages quoted from listings, or from the old index, are not the benchmark the rules work from.
For landlords, the classification creates a path the old index never offered. At launch the Land Department said openly that a landlord who wants a higher benchmark for an older building may first need to lift the building’s rating through upgrades and maintenance. In other words, investment in the building now feeds the rent conversation directly, through the rating, instead of only through what a new tenant might agree to pay.
For both sides, one caution: the index tells you the comparison average for your unit when you run it. It does not award either side a narrative. If a renewal is disputed, read our step-by-step guide to challenging a rent increase, which covers the notice test, the documents and the Rental Disputes Centre route.
Methodology: the launch mechanics in this guide (launch date, the one-to-five star classification, the 60-plus criteria families, the three inputs to the average, continuous updating and emirate-wide residential coverage) are taken from the Dubai Land Department’s launch announcement of 2 January 2025 and the Department’s statements reported at launch. The worked examples are illustrations computed with the Decree 43 formula; their averages are example figures chosen to show the mechanism, not readings from the live index. The classification of any individual building is held in the index and is not published as a public table.
How to check your building and your average
- Open the Rental Index service on the Dubai Land Department website, or the same service inside the Dubai REST app or DubaiNow.
- Enter the details the service asks for: your area, unit type and contract details. The result is the comparison average for your unit under the current index.
- Save the result with the date. Because the index updates continuously, the date is part of the evidence.
- Compute your gap with the average as the denominator, then read off your band. Our RERA rental increase calculator does this step for you.
- Compare the result with any figure your landlord has quoted. If the two differ, ask for the source of their average before discussing the increase itself.
- Repeat the check at every renewal. Last year’s result describes last year’s index.
Which situation are you in?
| Your situation | What the Smart Index means | Your move |
|---|---|---|
| Your landlord quotes an area average from a property portal | Portal asking rents are not the index. The legal benchmark is the index result for your unit | Run the official index service, save the result, and reply with that figure |
| Your building was renovated last year and the landlord wants a large rise | Renovation can lift the classification and with it the average, widening your gap | Check the current index result, work out your band, and test the demand against the cap, not against last year’s rent alone |
| Your older building sits among new towers and the landlord claims a top-band rise | The building should now be measured against similar buildings, not the towers | Run the index for your unit. If the average comes back near your rent, the claimed band is likely wrong; the rules guide shows how to set out the correction |
| You are a landlord in a well-maintained building priced below newer neighbours | Your classification may support a higher average than the old area figure did | Run the index, attach the result to a notice served at least 90 days before expiry, and stay inside the band it produces |
Smart Index checklist
- Run the official index check within the renewal window, not from an old screenshot.
- Save the result as a dated document alongside your contract and Ejari certificate.
- Confirm the average in the result is the one any landlord figure is based on. If it is not, ask for their source.
- Compute the gap with the index average as the denominator, never with your own rent.
- Read off the band and the maximum new rent before opening any negotiation.
- Check the landlord’s notice date: at least 90 days before expiry, unless your contract sets a different period.
- If your building has been upgraded or has visibly declined since you moved in, expect the average to have moved and run the check fresh.
- Keep the index result, the notice and your reply together. Renewal disputes are decided on documents.
Common mistakes
- Arguing from last year’s index result. The old index was annual, so an old printout once stayed valid for a year. The Smart Rental Index updates continuously, and a stale result misstates your band.
- Treating the star rating as the cap. The rating feeds the average. The cap still comes from the gap against that average and the Decree 43 bands. A five-star building does not get an automatic 20%.
- Assuming the rating only helps landlords. Example B shows the reverse: a low classification pulls the benchmark down toward the building’s real peer group and can cut the cap by two bands.
- Comparing your rent with a neighbour’s renewal. Two flats on one street can sit in buildings of different classes, against different averages, in different bands. Your neighbour’s outcome is not evidence about yours.
- Quoting portal averages as the index. Asking rents for new leases are not registered contract data and are not the benchmark the decree points to.
Myth vs fact
Myth: The Smart Rental Index replaced the rent increase caps with free negotiation.
Fact: The caps are untouched. Decree No. 43 of 2013 still limits increases to the five bands, and the 90-day notice rule still applies. The index changed the measurement, not the law.
Myth: A five-star rating means the landlord can charge five-star rents at renewal.
Fact: The rating raises the comparison average, but the increase at renewal is still the band percentage of the current rent. Even a top-rated building cannot lift a sitting tenant’s rent by more than the band for its gap allows.
Myth: The index is updated once a year like the old one.
Fact: The Smart Rental Index updates continuously from live registered-contract data. That is why a dated, current result matters at every renewal.
Frequently asked questions
When did the Smart Rental Index start?
The Dubai Land Department launched it on 2 January 2025. It replaced the old area-based rental index for residential property across Dubai, including free zones and special development areas.
What is the star rating based on?
More than 60 criteria in four families: technical and structural characteristics, the quality of finishes and maintenance, location and spatial value, and services and facilities such as cleanliness, security and parking management. The Department publishes the framework; the score for an individual building sits inside the index.
Did the Smart Rental Index change how much my rent can rise?
It changed the average your rent is measured against, not the bands. Your cap is still 0%, 5%, 10%, 15% or 20% under Decree No. 43 of 2013, selected by the gap between your rent and the index average. Our rent increase rules guide works the bands through in full.
Can a landlord improve a building’s rating?
Yes, that link was stated by the Land Department at launch. Upgrades and better maintenance can lift the classification, which can lift the building’s comparison average at later renewals. The rating responds to the building’s actual condition and services, so the route runs through real investment, not paperwork.
How do I check the index for my home?
Use the Rental Index service on the Dubai Land Department website or in the Dubai REST app, enter your unit details, and save the dated result. Then run your rent and that average through our RERA rental increase calculator to see your band and cap.
Does the Smart Rental Index cover commercial property?
The January 2025 launch classified residential buildings, and the rent increase bands in Decree 43 apply to residential renewals. Commercial coverage was announced as following the residential launch; commercial leases also commonly set their own increase terms in the contract, so read yours first.
See what the new average does to your renewal
Two figures decide your increase: your current rent and the index average for your home. Enter both to see your band, your cap and the highest lawful new rent.
Check My Rent IncreaseSources and Methodology
- Dubai Land Department, Smart Rental Index launch, 2 January 2025: the one-to-five star building classification, its 60-plus criteria, the blend of area average, building contract rents and classification, continuous updating and emirate-wide residential coverage, as announced by the Department and reported from its launch briefing.
- Government of Dubai, Decree No. 43 of 2013 (official text hosted by the Dubai Land Department): Article 1 sets the five bands and Article 3 ties the average to the RERA-approved rental index.
- Dubai Land Department, Rental Index service: the official index check, its inputs and its channels (DLD website, Dubai REST and DubaiNow).
- Dubai Legislation Portal, Law No. 33 of 2008 amending Law No. 26 of 2007: the amended Article 14 behind the 90-day notice rule.
Methodology: launch mechanics are stated as the Land Department announced them at launch; where launch coverage and later commentary differ, this guide follows the launch record and says so. Both worked examples were recomputed by hand with the decree formula, gap equals (index average minus current rent) divided by index average, and their band outcomes were cross-checked against the bracket logic in the RERA rental increase calculator on this site. Example averages are illustrative figures, not readings from the live index. This guide explains the general system and is not legal advice for an individual tenancy.
