Updated: November 2026

SEWA Bill Charges Explained: Sharjah Electricity, Water and Gas Tariffs

Quick answer: A SEWA bill is built from five parts. Electricity is charged in four progressive slabs, from 23 fils per kWh for the first 2,000 units up to 38 fils above 6,000 units, plus a fuel surcharge of 6 fils on every unit. Water is billed in gallons, in three slabs from 3.5 to 4.6 fils per gallon, plus a surcharge of 0.5 fils per gallon. Gas is billed per cubic metre at the rate printed on your own bill. VAT at 5% is then added to the total. A Sharjah apartment using 1,450 kWh and 4,800 gallons pays AED 643.13 for the month.

If you have moved to Sharjah from Dubai or Abu Dhabi, the SEWA bill is usually the first utility bill that makes you stop and stare. The numbers look wrong. Water consumption appears in the tens of thousands. The electricity rate changes partway down the page. A surcharge sits under each service. None of this is an error. Sharjah simply bills differently, and once you know how each line is built, the whole bill takes about a minute to check.

SEWA is the Sharjah Electricity, Water and Gas Authority, the government utility for the emirate of Sharjah. It is the only one of the four main UAE utilities that supplies electricity, water and piped natural gas from a single authority, so one monthly bill can carry all three services. This guide walks through every line of that bill: the slab tariffs, both fuel surcharges, the VAT calculation, the gallons unit that makes water look enormous, and the honest position on gas, where the rate you should use is the one printed on your own bill.

Open the SEWA Bill Calculator

On This Page

Key takeaways: Electricity slabs are progressive, so only the units inside each block pay that block’s rate. The fuel surcharges (6 fils per kWh and 0.5 fils per gallon) apply to every unit, not just the top slab. Water is billed in gallons, and 1 cubic metre is about 220 gallons, which is why the water figure looks so large. VAT at 5% is calculated on the full subtotal at the end. SEWA does not publish a residential gas tariff in its official calculator, so the gas rate on your own bill is the figure to trust.

The Five Building Blocks of a SEWA Bill

Every SEWA bill, whether it is for a studio flat or a large villa, is assembled the same way. Understanding the order matters, because VAT is charged on everything before it, and the surcharges are part of what VAT is charged on.

StepChargeHow it is worked out
1Electricity tariffYour kWh split across four slabs, each block at its own rate
2Electricity fuel surcharge6 fils for every kWh you used
3Water tariffYour gallons split across three slabs, each block at its own rate
4Water fuel surcharge0.5 fils for every gallon you used
5Gas chargeCubic metres used, at the rate printed on your bill
6VAT5% of the subtotal of steps 1 to 5

Bills are monthly and based on meter readings, and the reading date is printed on the bill itself. If your reading date moves by a few days from one month to the next, that month covers slightly more or fewer days, which is one reason two bills for the same home are rarely identical even when your habits do not change.

Electricity Charges: The Four Slabs

SEWA charges residential electricity in four progressive monthly slabs. SEWA labels them by colour in its own energy calculator: Green, Yellow, Orange and Red. Progressive means the blocks stack. Your first 2,000 units always cost 23 fils each, even if you go on to use 7,000 units. Only the units above each threshold pay the higher rate.

SlabMonthly kWhTariff per kWh
Green0 to 2,00023 fils
Yellow2,001 to 4,00028 fils
Orange4,001 to 6,00032 fils
Red6,001 and above38 fils
Electricity tariff = (first 2,000 kWh x 23 fils) + (next 2,000 x 28 fils) + (next 2,000 x 32 fils) + (units above 6,000 x 38 fils)

SEWA’s own worked check makes the base rate easy to confirm: 1,000 kWh at 23 fils per kWh gives a tariff of AED 230.00 before the surcharge. Most Sharjah apartments sit inside the Green slab for most of the year and cross into Yellow in the summer, when air conditioning runs almost around the clock. Villas and large family flats routinely reach Orange, and the biggest homes cross into Red.

Take a flat that uses 2,300 kWh in a month. The tariff is not 2,300 times a single rate. It is 2,000 units at 23 fils (AED 460.00) plus 300 units at 28 fils (AED 84.00), which gives AED 544.00. That stacking is the single most misunderstood part of the SEWA bill, and it is why multiplying your whole consumption by the top rate you see quoted on a blog always overstates the bill.

Methodology: Every tariff and surcharge in this guide comes from SEWA’s official energy calculator at sewa.gov.ae, read in November 2026. The worked examples below were calculated by hand from those published slabs and cross-checked against our SEWA bill calculator, which uses the same figures. Where SEWA does not publish a figure, this guide says so plainly rather than filling the gap from third-party sites.

The Electricity Fuel Surcharge

Underneath the slab tariff sits a fuel surcharge of 6 fils per kWh. It applies to every unit you use, from the first to the last. It is not slabbed and it does not stop at any threshold. A home using 1,450 kWh pays 1,450 x 6 fils, which is AED 87.00, on top of its slab tariff of AED 333.50.

The surcharge exists because the cost of generating electricity moves with fuel prices, and SEWA passes that cost through as a separate, visible line rather than folding it into the slab rates. The practical effect for you is simple: your true cost per unit is the slab rate plus 6 fils. A Green slab unit really costs 29 fils before VAT, not 23. When you compare your Sharjah bill with a neighbour’s, compare tariff plus surcharge, or you will think one of the bills is wrong.

Water Charges: Why Your Bill Is in Gallons

The water section is where Sharjah bills look strangest to newcomers. SEWA bills water in gallons, not in cubic metres. A family that uses 20 cubic metres of water in a month, an unremarkable figure, sees roughly 4,400 gallons on the bill. The consumption has not exploded. The unit is simply smaller.

1 cubic metre = about 220 gallons. To convert your bill back, divide the gallons by 220.

Water is charged in three progressive slabs, again labelled by colour in SEWA’s calculator:

SlabMonthly gallonsTariff per gallon
Green0 to 6,0003.5 fils
Yellow6,001 to 12,0004.0 fils
Red12,001 and above4.6 fils

The same stacking rule applies. The first 6,000 gallons always cost 3.5 fils each. A home using 7,500 gallons pays 6,000 x 3.5 fils (AED 210.00) plus 1,500 x 4.0 fils (AED 60.00), a tariff of AED 270.00. As a sense check, the Green rate of 3.5 fils per gallon works out at about AED 7.70 per cubic metre, which is in the same range as water pricing elsewhere in the UAE once you convert the units.

Water also carries a fuel surcharge, at 0.5 fils per gallon on every gallon. It is small per unit but it is not small on the bill: 7,500 gallons adds AED 37.50, and a villa using 21,000 gallons adds AED 105.00. If you are checking a bill and your tariff maths is right but the total is still short, the water surcharge is the line most people forget.

Gas Charges: The Honest Position

Sharjah is unusual in the UAE because many homes have piped natural gas for cooking and water heating, supplied by SEWA itself. Gas is billed per cubic metre. Here is the part most calculator sites will not tell you: SEWA’s official energy calculator covers electricity and water only, and SEWA does not currently publish a residential gas consumption tariff on its website.

What is on record is this. The last gas tariff SEWA announced publicly was a unified rate of AED 1.25 per cubic metre for domestic users, approved by the Sharjah Executive Council. A later increase, to AED 1.75 per cubic metre, applied only to industrial and commercial users, and SEWA stated at the time that it would not affect the residential sector.

What this means for your bill: use the gas rate printed on your own SEWA bill. It is the only figure that is certainly the one being applied to your account. Our SEWA bill calculator includes a gas field with an editable rate, starting from that last announced residential rate of AED 1.25 per cubic metre, so you can overwrite it with the exact rate from your bill. Any site that presents a gas tariff as SEWA’s current published rate is going further than SEWA itself does.

One more gas point: no gas fuel surcharge is published in SEWA’s official calculator, so this guide does not add one. The gas line on your estimate is simply cubic metres multiplied by the rate.

VAT: The Last Line Before the Total

Once the electricity, water and gas lines are added together, VAT at 5% is applied to the subtotal. In SEWA’s own calculator, VAT is shown on the total bill for electricity and water. Our calculator applies the same 5% to the full subtotal including gas, and says so on the page, so the estimate matches the way the tax is presented on a combined bill.

VAT is charged on the surcharges too, because the surcharge is part of the price of the supply. This is why checking a bill by applying 5% only to the slab tariffs leaves you a few dirhams short every time. The order is always: tariffs, then surcharges, then gas, then 5% on everything.

Three Complete Bills, Worked Line by Line

Example 1: A typical apartment, electricity and water

A two-bedroom flat in Al Majaz uses 1,450 kWh of electricity and 4,800 gallons of water in a month, with no gas connection.

LineWorkingAED
Electricity tariff1,450 x 23 fils333.50
Electricity surcharge1,450 x 6 fils87.00
Water tariff4,800 x 3.5 fils168.00
Water surcharge4,800 x 0.5 fils24.00
Subtotal612.50
VAT at 5%612.50 x 5%30.63
Total643.13

Example 2: A villa using all three services

A villa in Al Rahmaniya uses 6,800 kWh, 21,000 gallons of water and 120 cubic metres of gas. This bill crosses every electricity slab and every water slab.

LineWorkingAED
Electricity tariff(2,000 x 23) + (2,000 x 28) + (2,000 x 32) + (800 x 38) fils1,964.00
Electricity surcharge6,800 x 6 fils408.00
Water tariff(6,000 x 3.5) + (6,000 x 4.0) + (9,000 x 4.6) fils864.00
Water surcharge21,000 x 0.5 fils105.00
Gas120 m3 x AED 1.25150.00
Subtotal3,491.00
VAT at 5%3,491.00 x 5%174.55
Total3,665.55

Notice what the slabs do here. Even in a bill that reaches the Red slab, 2,000 of the units were still charged at the Green rate of 23 fils. The blended electricity tariff works out at about 28.9 fils per kWh, well below the 38 fils Red rate that a flat-rate estimate would have used for the whole 6,800 units.

Example 3: A gas-heavy family flat

A family flat with gas cooking and a gas water heater uses 2,300 kWh, 7,500 gallons and 260 cubic metres of gas.

LineWorkingAED
Electricity tariff(2,000 x 23) + (300 x 28) fils544.00
Electricity surcharge2,300 x 6 fils138.00
Water tariff(6,000 x 3.5) + (1,500 x 4.0) fils270.00
Water surcharge7,500 x 0.5 fils37.50
Gas260 m3 x AED 1.25325.00
Subtotal1,314.50
VAT at 5%1,314.50 x 5%65.73
Total1,380.23

Run your own meter figures through the SEWA bill calculator and it will show you this same breakdown, slab by slab, for your exact consumption. If you are new to Sharjah and have not received a bill yet, our guide to SEWA connection and deposit costs covers how the account itself is opened.

What Is Not on a SEWA Bill

Two absences cause confusion. First, sewerage. In Sharjah, sewerage and drainage are a Sharjah Municipality matter, not a line in SEWA’s official energy calculator, so no sewerage charge is included in the totals in this guide. Some third-party calculators quietly add a sewerage figure borrowed from other emirates. That figure has no published SEWA source behind it, and we do not use it.

Second, separate tariff tables. SEWA’s official calculator publishes one residential slab set. It does not publish a separate residential table for UAE nationals, and it does not publish commercial or industrial slab tables alongside it. The tariffs in this guide are therefore the residential tariffs, and they are the ones that apply to homes. If you run a business from commercial premises, your account is a different arrangement and this guide is not the place to price it.

Myth vs Fact

MythFact
Once you cross 6,000 kWh, every unit is charged at 38 fils.The slabs are progressive. Only the units above 6,000 pay 38 fils. Your first 2,000 units always pay 23 fils.
The huge water number means a leak or a meter fault.SEWA bills water in gallons. Divide by about 220 to get cubic metres. A reading of 11,000 gallons is roughly 50 cubic metres.
The gas tariff on calculator blogs is SEWA’s current published rate.SEWA’s official calculator covers electricity and water only. The gas rate printed on your own bill is the reliable figure.
The fuel surcharge is a penalty for high usage.It is a flat per-unit charge on every unit: 6 fils per kWh and 0.5 fils per gallon, from the first unit onwards.

If Your Bill Shows This, Check That

What you seeWhat to check
Total is higher than your slab mathsDid you add both fuel surcharges before VAT? They are the most commonly missed lines.
Water consumption looks enormousConvert gallons to cubic metres (divide by 220) before comparing with your old Dubai or Abu Dhabi bills.
Bill jumped in summer with the same habitsCheck which slab your electricity crossed into. Air conditioning pushes flats from Green into Yellow and Orange.
Gas line does not match any website rateTrust the rate printed on the bill itself. SEWA does not publish a residential gas tariff on its website.
Two homes, same size, very different billsCompare reading dates first. A 33-day billing period costs more than a 28-day one at identical daily usage.

Checklist: Reading Your Own Bill

  1. Find the reading date and count the days in the billing period.
  2. Take the electricity units and split them across the four slabs: 2,000 at 23 fils, the next 2,000 at 28, the next 2,000 at 32, the rest at 38.
  3. Add the electricity surcharge: total kWh multiplied by 6 fils.
  4. Take the water gallons and split them across the three slabs: 6,000 at 3.5 fils, the next 6,000 at 4.0, the rest at 4.6.
  5. Add the water surcharge: total gallons multiplied by 0.5 fils.
  6. Add gas: cubic metres multiplied by the rate printed on your bill.
  7. Add the lines together, then add 5% VAT. That is your total.

Common Mistakes

  • Charging every unit at the top slab. This is the most common error in online SEWA estimates. The slabs stack, so a 6,800 kWh bill is mostly charged at the lower rates.
  • Comparing gallons with cubic metres. Sharjah water figures look about 220 times larger than the same usage in Dubai. Convert before you panic, and before you report a leak.
  • Forgetting the surcharges. Together they add 6 fils to every kWh and 0.5 fils to every gallon, and VAT is charged on them as well.
  • Copying a gas rate from a blog. Some of those rates are a decade old or describe industrial supply. Your bill prints your rate. Use it.
  • Adding a sewerage charge that is not SEWA’s. Sewerage in Sharjah sits with the municipality, not in SEWA’s calculator, so it does not belong in a SEWA bill estimate.

Frequently Asked Questions

How is the SEWA electricity charge calculated?

Your monthly kWh are split across four progressive slabs: the first 2,000 at 23 fils each, the next 2,000 at 28 fils, the next 2,000 at 32 fils and anything above 6,000 at 38 fils. A fuel surcharge of 6 fils is then added for every kWh, and VAT at 5% is applied at the end as part of the total bill.

What is the fuel surcharge on a SEWA bill?

It is a per-unit charge that sits alongside the tariff: 6 fils for every kWh of electricity and 0.5 fils for every gallon of water. It applies to all units from the first one, not just to usage in the higher slabs.

Why is SEWA water billed in gallons instead of cubic metres?

SEWA bills water in gallons, which is simply the unit its tariffs are published in. One cubic metre is about 220 gallons, so divide the gallons on your bill by 220 to compare your usage with utilities that bill per cubic metre.

Does VAT apply to the whole SEWA bill?

Yes. VAT at 5% is applied to the subtotal, which includes the slab tariffs, both fuel surcharges and, in our calculator’s treatment of a combined bill, the gas charge. It is not applied to the tariff lines alone.

What gas rate should I use for my SEWA estimate?

Use the rate printed on your own SEWA bill. SEWA’s official calculator does not cover gas and SEWA does not publish a residential gas tariff on its website. The last publicly announced unified residential rate was AED 1.25 per cubic metre, which is the starting value in our calculator’s editable gas field.

Is sewerage included in a SEWA bill?

No. Sewerage in Sharjah is a Sharjah Municipality and drainage matter. It does not appear in SEWA’s official energy calculator, so it is not included in the estimates in this guide or in our calculator.

Sharjah is one of four utility systems in the UAE, each with its own tariffs and its own units. You can compare how the others are built across the full set of UAE living cost calculators, and if you are still at the moving stage, start with the connection guide linked above before your first bill arrives.

Calculate Your SEWA Bill

Sources and Methodology

Sources

Electricity and water slab tariffs, both fuel surcharges and the VAT treatment: SEWA’s official energy calculator at sewa.gov.ae/en/energy-calculator. SEWA’s piped natural gas service for domestic, commercial and industrial users: SEWA homepage at sewa.gov.ae. The last announced unified residential gas rate of AED 1.25 per cubic metre was approved by the Sharjah Executive Council and reported by MEES; the later increase to AED 1.75 per cubic metre for industrial and commercial users only was reported by Khaleej Times in October 2013. All worked examples were calculated by hand from the published slabs and cross-checked with our SEWA calculator.

Last updated: November 2026

Author: Elena Rostova

Similar Posts